NDIS2 Driver for Microsoft Network Client 3.0 for MS-DOS Installation Guide:

Drivers:

B57.dos   	   Gigabit NIC NDIS2 for DOS Driver Installation File
oemsetup.inf       Installation setup script  
PROTOCOL.INI       SAMPLE configuration file
README.TXT         Driver Version
INSTALL.TXT        This file
Notes.txt          Chipset Vendor of Readme Notes  
 
Installation Procedures:

1. Plug the adapter into one of the Master PCI slots of your PC.

2. Power on your PC.

3. Get Microsoft Network Client 3.0 for MS-DOS diskette.

4. Execute SETUP.EXE from Microsoft Network Client for DOS release
   diskette.

5. Specify the <target path> which Microsoft Network Client for DOS
   files will been copy.

6. Select "Network adapter not shown on list below ...".

7. Please specify the location (path,<CD drive>:\ndis2) of the OEM
   driver you want to use, press <Enter>.

8. Select "Broadcom Ethernet".

9. Select "Change Network Configuration", "Add Protocol" as you want.

10. Follow screen instructions to complete the process. Simply
    pressing <Enter> for each screen display will select the default
    options. Press <Enter> until you reach the display prompting you
    to reboot your system.

